Forged Parts
Open-Die Forging Company from Italy
founded 1976
Weight: up to 40 tons
Wide range of materials
Sawing up to 2300 mm
In-house machining
Forged Parts: Detailed Overview of the Most Common Materials
Carbon steels
- EN 1C22 / 2C22 / 3C24
- EN 1C25 / 2C25 / 3C25
- EN 1C30 / 2C30 / 3C30
- EN 1C40 / 2C40 / 3C40
- EN 1C45 / 2C45 / 3C45
- EN 1C50 / 2C50 / 3C50
- EN S355JR
- EN S355J2G3
- EN S235JR
- EN S235JO
- EN S275J2G3
- EN S275JR
Alloyed steels
- EN 17NiCrMo6.4
- EN 14NiCrMo13.4
- EN 18CrNiMo7.6
- EN 25CrMo4
- EN 30CrMo4
- EN 34CrMo4
- EN 42CrMo4
- EN 36NiCrMo4
- EN 34CrNiMo6
- EN 30CrNiMo8
- EN 27NiCrMoV11.6
- EN 30CrMoV9
- EN 36NiCrMo16
- EN 32CrMo12
- EN X10CrMoVNb9.1
High alloyed steels
- EN X5CrNiMo17.12.2
- EN X2CrNiMo17.12.2
- EN X12Cr13
- EN X3CrNiMo13.4
- EN X4CrNiMo16.5.1
- EN X5CrNi18.10
- EN X2CrNi18.9
- EN X1CrMoCuN20.18.7
- EN X5CrNiCuNb16.4
Duplex und Super-Duplex
- EN X2CrNiMoN22.5.3
- EN X2CrNiMoN25.7.4
- EN X2CrNiMoCuWN25.7.4
Tool steels
- EN 40CrMnMo7
- EN 40CrMnMoS8
- EN 46CrSiMoV7
- EN X38CrMoV51
- EN X40CrMoV51
- EN 56NiCrMoV7
- EN 40CrMnNiMo8
Nickel-based alloys:
- Alloy 800H
- Alloy 800HT
- Alloy 800
- Alloy 825
- Alloy 625
- Alloy 718
- Alloy 725
Facilities
- Forging presses with a pressing force of up to 5000 tons, equipped with a quick-change tool system, a movable press plate, and a production setup allowing more than 70 strokes per minute
- Facility with API-6A certification for heat treatment of up to 100 tons (length: 12 m)
- Water and polymer quenching tanks for hardening or solution annealing of components weighing up to 40 tons
- In-house machining capabilities
- On-site laboratory
Certifications
- ISO 9001:2015
- Bureau Veritas Marine & Offshore
- ABS (American Bureau of Shipping)
- DNV
- AD 2000-Merkblatt W 0 + EN 764-5, Clause 4.2
- Lloyd’s Register
- ISO 14001:2015
- ISO 45001:2018
Post-Processing
- Heat treatment
- Sawing up to 2300 × 2000 mm
- Center lathes up to 12 m
- Vertical lathes up to Ø 2500 mm
- Milling and drilling machines up to 8500 mm
