Test Benches

We build your custom test bench

Rising requirements for efficiency, safety, and compliance present major challenges for valve, pump, and drive manufacturers, as well as maintenance teams. Test benches play a crucial role by providing reliable testing under realistic conditions, ensuring quality, and minimizing failure risks.

Key Benefits at a Glance

Customer-specific

Built to your specifications and requirements.

Manufactured in Italy

Test benches have been manufactured in Marnate, Italy since 1992, relying solely on European suppliers.

Experience

A manufacturer with decades of experience, serving critical industries worldwide—including oil & gas—and a leader in large-scale and high-pressure solutions.

Trusted Partner

ISO 9001:2015; In addition to on-site setup and training, we provide long-term maintenance agreements and continuous support.

Vertical test benches

Vertical test bench with clamping system via screw or hydraulic cylinder
Valve sizes under pressure testing from 1/2” to 120”
Maximum reaction force up to 3000 tons
Testing according to API, ANSI, DIN, BS, ISO, EN standards
Hydraulic pressure testing up to 4000 bar
Gas pressure testing up to 2100 bar
Cavity line (3rd injection line)
Analog or electronic leakage measurement systems
Torque measurement for actuators up to 150,000 Nm, including automated test cycles for opening and closing valves
Mobile valve holder for easier loading and unloading
ATEX compliance (optional)
Operator protection according to EN 14121
Hydrogen testing (optional)

Horizontal test benches

Horizontal test benches for testing valves from ½” to 84” or pipelines up to 12 m in length
Maximum reaction force up to 6000 tons
Testing according to API, ANSI, DIN, BS, ISO, EN standards
Hydraulic pressure testing up to 4000 bar
Gas pressure testing up to 2100 bar
Vacuum system
Cavity line (3rd injection line) or for DBB valves
Single or double valve holders/lifters with 50-ton load capacity
Analog or electronic leakage measurement systems
ATEX compliance (optional)
Operator protection according to EN 14121
Hydrogen testing (optional)

Multistage test bench

Valve sizes under test from 1/2” to 12”
Maximum reaction force of 400 tons at all test stations
Leak detection for each individual test station
Testing according to API, ANSI, DIN, BS, ISO, EN standards
Hydraulic pressure testing up to 4000 bar
Gas pressure testing up to 2100 bar
Analog or electronic leakage measurement systems
Torque measurement for actuators up to 150,000 Nm, including automated test cycles for opening and closing valves
ATEX compliance (optional)
Operator protection according to EN 14121
Hydrogen testing (optional)
Hydraulic clamping plates for valves

Tilting Test Bench

Valve sizes under pressure testing from 1/2” to 24”
Maximum reaction force up to 600 tons
Testing according to API, ANSI, DIN, BS, ISO, EN standards
Hydraulic pressure testing up to 4000 bar
Gas pressure testing up to 2100 bar
Cavity line (3rd injection line)
ATEX compliance (optional)
Analog or electronic leakage measurement systems
Operator protection according to EN 14121
Hydrogen testing (optional)

Actuator Test Bench

Maximum torque control up to 1,000,000 Nm
Maximum angle control up to 100° or for multiple rotations
Both static and dynamic testing
Clockwise and counterclockwise rotation
Electric actuators with torque up to 20,000 Nm

Pipe test bench

Test benches for hoses to perform leak, burst, and elongation tests
Testing with water, oil, or air
Capability to perform temperature tests
Test benches for rigid pipelines with a maximum diameter of 60” featuring hydraulic testing up to 4000 bar and pneumatic testing up to 1500 bar
Pipe lengths up to 12 m

Test Bench for Safety Valves

Valve clamping on the work surface with manual or automatic clamping devices featuring hydraulic locking
Valve sizes under test from 1/2” to 16”
Maximum reaction force of 170 tons
Hydraulic pressure testing up to 2100 bar
Gas pressure testing up to 1200 bar
Analog or electronic leakage measurement systems
ATEX compliance (optional)
Operator protection according to EN 14121
Hydrogen testing (optional)

Cryogenic Test Bench

Available in various sizes from 1’’ to 12’’
Automatic temperature control system for LTT tests at -55 °C or -110 °C
Optional “exhaust/ventilation system” available on request
Optional control unit for monitoring oxygen concentration
Automatic pressure application console for tests with mixed gas or 100 % helium

Portable Control Units

<ul>
<li>Suitable for hydraulic testing up to 4,000 bar or gas testing up to 2,500 bar</li>
<li>Equipped with 1 or 2 pressure supply lines</li>
<li>Digital pressure gauges with PC interface for recording test data</li>
<li>Easy loading and unloading onto trucks or cars</li>
</ul>

Special Test Bench

“Hot oil” testing up to 150 °C
Cryogenic testing down to -196 °C
Fire protection testing system
Testing system for CV calculation
Station for nitrogen generation from liquid nitrogen
Equipment for underwater testing
Special tests according to customer specifications
Specialized equipment for testing and assembly
Portable pressure application panels
Test benches for “mud tests”
Hyperbaric chambers
Hydrant testing equipment
Hydrogen pump stations

Mobile Workshop

Containers from 20’’ to 40’’ equipped with a valve test bench
Transportable container
Sea freight container
Separate work areas
Air conditioning
Power supply via external source or integrated generator
ATEX certification available (on request)
RINA certification
Overhead crane up to 500 kg
Integrated air compressor

Bunker and Armored Protection

Modular bunkers and protective enclosures for high-pressure or explosion testing, built to customer specifications
Interior lining of wood/aluminum to prevent rebound effects from ejected parts
System with high-resolution cameras for inspection and test recording, including remote monitoring
Can be combined with pressure application stations for hydraulic testing up to 4,000 bar and gas testing up to 1,500 bar
Wall thicknesses designed according to specific requirements
Automatic closing of roof and doors